News - Sinoplast Machinery

Industry News

Company News

Exhibition News

Sep 30,2026

Plan your plastic thermoforming line with confidence. This guide covers factory layout, power, water, compressed air, in...

Sep 15,2026

Choosing a plastic cup thermoforming machine? These 5 practical tips cover output calculation, material compatibility, e...

Sep 07,2026

Considering a plastic cup making machine for your production line? These 7 questions cover output, energy, materials, an...

Sep 01,2026

Choosing between PET and PP for thermoforming? This guide compares forming temperatures, cycle speeds, moisture requirem...

Aug 27,2026

Frequent mold changes disrupting your thermoforming production line? This guide breaks down the root causes of changeove...

Aug 20,2026

Single station machines offer simplicity and fast changeovers. Multi-station systems deliver higher throughput. This gui...

Aug 15,2026

Flash is excess plastic that escapes between mold halves during forming. This guide covers the root causes of flash—from...

Aug 07,2026

PET runs faster but requires drying; PP handles heat better but runs slower. This guide compares the pros and cons of th...

Jul 31,2026

Webbing, thinning, warping, and other thermoforming defects cost time and material. This guide covers the most common pr...

Jul 24,2026

Scrap waste can consume 20-50% of material input in thermoforming. This guide offers five practical strategies—from shee...

Jul 15,2026

PET, PS, and PP each offer distinct advantages for cup production. This guide compares clarity, heat resistance, process...

Jul 10,2026

Choosing a plastic cup thermoforming machine involves more than comparing prices. This guide offers five practical tips ...